Introduction to Steel Shots

Steel shotis a commonly used abrasive in various industries for surface preparation and Shot Peening. It is made through a complex manufacturing process that involves melting, atomizing, and heat treatment. we are the leading steel shot manufacturer in china. In this article, we will provide an overview of the manufacturing process of steel shots.

Steel shots are small spherical particles of steel that are used in a variety of applications such as surface preparation, cleaning, and shot peening. They are produced through a rigorous manufacturing process that involves melting steel and converting it into small, uniform-sized particles. Steel shots are preferred over other abrasives due to their high durability, consistent size and shape, and ability to recycle.

Manufacturing Process of Steel Shots

The manufacturing process of steel shots involves four main stages: melting, atomizing, heat treatment, and screening.

Melting Stage

The first stage of the manufacturing process is melting. High-quality steel scrap is loaded into a furnace and melted to a liquid state. The steel is heated to temperatures above 1,600 degrees Celsius to ensure that impurities are eliminated, and a consistent alloy is produced.

For More Information about steel shot manufacturer visit our website.

Atomizing Stage

The molten steel is then poured through a nozzle and atomized into small droplets. This is accomplished using high-pressure water jets or compressed air, which break up the molten steel into droplets ranging in size from a few microns to a few millimeters.

Heat Treatment Stage

The third stage of the manufacturing process is heat treatment. The steel droplets are then hardened and tempered through a controlled heat treatment process. This process involves heating the steel droplets to a specific temperature and holding them at that temperature for a specific duration. The steel droplets are then rapidly cooled to harden them.

Screening Stage

The final stage of the manufacturing process is screening. The hardened steel droplets are screened to separate them into different sizes. The steel shots in china are then classified into different size ranges, packaged, and sent to the market.