Bakin Karfe Shot
Cikakkun Bayanan Samfura
Haka kuma za mu iya samar da harsashin ƙarfe mai atomized, wanda za a yi shi da kayan ƙarfe masu inganci, kamar yadda yake a cikin abun ciki na Chrome, suna kama da SUS201, SUS304, SUS430 da sauransu. Girman da ake samu daga 0.1mm zuwa 3.0mm.
Baya ga girma da ƙayyadaddun bayanai na yau da kullun, muna kuma karɓar samarwa na musamman, kamar girma na musamman ko gajere, waya mai yankewa ko harbin yanke mai zagaye da sauransu. Don harbin waya mai yankewa na bakin ƙarfe mai magani, muna ba da ƙayyadaddun bayanai na G1/G2/G3, galibi ana ba da shawarar nau'in G2, ya dace da aikin aikin harbi zuwa aikin ƙarfe mai bakin ƙarfe, duka cikakke ne don tasirin fashewa da ingancin fashewa. Hakanan muna karɓar marufi na musamman da sauransu, kamar jakar takarda, carbon, ganga na ƙarfe da sauransu.
Manyan alamun fasaha na harbin yanke waya na bakin karfe
| iri ɗaya | SUS304 | SUS410 | |
| Sinadaran Hadin Kai | C | ≤0.15% | ≤0.15% |
| Kuma | ≤1.00% | ≤1.00% | |
| Mn | ≤2.00% | ≤1.00% | |
| S | 0.030% | ≤0.030% | |
| P | ≤0.045% | ≤0.035% | |
| Cr | 18-20 | 11-13 | |
| A cikin | 8-11 | ≤0.60 | |
| TauriS | HRC40-50 | HRC32-45 | |
| Tsarin ƙananan halittu | Austentic | Martensite | |
| Siffa ta waje | Silinda/Siffa mai siffar ƙwallo | Silinda/Siffa mai siffar ƙwallo | |
| Yawan yawa | ≥7.80g/cm³ | ≥7.80g/cm³ | |
Aikace-aikacen Samfura
Ana amfani da harsashin bakin karfe sosai wajen sarrafa harsashin aluminum, zinc alloy, takardar bakin karfe, simintin karfe mara ferrous da saman simintin bakin karfe da sauransu, yana iya haskaka hasken kayan karfe, ba zai sa saman simintin ya yi tsatsa ko ya canza launi ba. Bayan simintin ya yi santsi, iri ɗaya kuma babu tsatsa, tare da tasirin matte, babu buƙatar yin wani tsaftacewa, tsinken tsinkewa da sauran hanyoyin.
Marufin Samfura
bayanin2